High-country-tek DVC80 Uživatelský manuál stáhnout pdf (Strana 52)

P/N: 021-00154, Rev. A.6 - updated for V4.7 Tools Page | 52

Output Group Selected as Single Coil High-Side

Name Description Range

Name Set the state Current Target or

Process in percentage of min to max

current

0 = 0 Current, .1% = Min Current,

and 100% = Max Current

0% to 100%

Name.Enable Set the PWM to 0 or enable the

PWM

True [PWM Enabled], False

[PWM = 0]

Name.Short Get the Coil Flag for Short Status Off [Coil Ok], On [Coil Short]

Name.Open Get the Coil Flag for Open Status Off [Coil Ok], On [Coil Open]

Name.Rampup Set the ramp up rate (time to travel

from 0% to 100%)

0.0 to 65.00 s

Name.Rampdown Set the ramp down rate (time to

travel from 100% to 0%)

0.0 to 65.00 s

HSEvenName Set the Bang-bang Coil to On or Off Off, On

HSEven#Name.Short Get the Coil Flag for Short Status Off [Coil Ok], On [Coil Short]

HSEven#Name.Open Get the Coil Flag for Open Status Off [Coil Ok], On [Coil Open]

HSOdd#Name.OpenDisable Set the Disable Coil Open Detection 0 [Enabled], 1 [Disabled]

HSOdd#Name.Short Get the Coil Flag for Short Status Off [Coil Ok], On [Coil Short]

HSOdd#Name.Open Get/Set the Coil Flag for Open

Status

Off [Coil Ok], On [Coil Open]

Name.Cur Current actual * CurGain = amps 0 – 3.5 amps

Name.RampCur Current ramped Currend*CurGain=

amps

0 – 3.5 amps

Name.CurErr Current Error = RampCur – Cur 16 Signed Integer

Name.CurSumErr Current Error accumulated over time 0 – 65535

Name.CurP Current Proportional Term Constant

“P”

0 – 255

Name.CurI Current Proportional Term Constant

“I”

0 – 255

Name.MinCurA Minimum Current Coil A *.001 =

amps

0 – 3.5 amps

Name.MaxCurA Maximum Current Coil A *.001 =

amps

0 – 3.5 amps

Name.Config Configuration Word –Output,

Process, Coil

Output Group Selected as Single Coil Low-Side

Name Description Range

Name

Set the state Current Target or Process in

percentage of min to max current

0 = 0 Current, .1% = Min Current, and

100% = Max Current

0% to 100%

Name.Enable Set the PWM to 0 or enable the PWM True [PWM Enabled],

False [PWM = 0]

Name.Short Get the Coil Flag for Short Status Off [Coil Ok], On [Coil

Short]

Name.Open Get the Coil Flag for Open Status Off [Coil Ok], On [Coil

Open]

Name.Rampup Set the ramp up rate (time to travel from

0% to 100%)

0.0 to 65.00 s

Name.Rampdown Set the ramp down rate (time to travel 0.0 to 65.00 s

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 169 170

Komentáře k této Příručce

Žádné komentáře

High-country-tek DVC80 Uživatelský manuál Strana 52

Komentáře k této Příručce

Související produkty a manuály pro Senzory High-country-tek DVC80