High-country-tek DVC80 Uživatelský manuál stáhnout pdf (Strana 31)

P/N: 021-00154, Rev. A.6 - updated for V4.7 Tools Page | 31

Digital Input Code Example

Code Comments

If (Dig_1 = True) Then if logic test True or False based on the state of

the input

HS_1 = Dig_1 Sets an output to the state of the Input

PWM_1.Dir = Dig_1 Set direction of a dual coil based on the state

of the input

Dig_1 = False Set the state of an Input to False (Toggle mode

Only)

DVCLED_1 = True Turns on the programmable LED of a DVC5

DVC7 Digital Pulse Inputs

The DVC7’s digital inputs can be configured to be pulse inputs with RPM and counter modes. You configure the

digital inputs using the following two windows. The modes operate very much like the Pulse input capability of

the Universal Inputs.

You access the Pulse capability using the variables

Dig_1.RealRPM

Dig_1.PulsesperRev

Dig_1.Pulsetimeout

Dig_1.counter

Dig_1.LOS

Input Impedance

The input impedance for all inputs, other than current inputs is 10k ohms. The input impedance for current

inputs is 120 ohms.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 169 170

Žádné komentáře

High-country-tek DVC80 Uživatelský manuál Strana 31