High-country-tek DVC80 Uživatelský manuál stáhnout pdf (Strana 145)

P/N: 021-00154, Rev. A.6 - updated for V4.7 Tools Page | 145

11 Safety is Everyone’s Responsibility

Safe work practices need to be observed in building the hardware connections, mounting the units to the

machinery, and programming the controllers.

11.1 Safety in building the hardware connections

Safety shoul

d be at the forefront of the development team’s thoughts. Many times during development,

technicians and engineers will fabricate test fixtures, care must be taken not to short circuit power supplies and

output devices. Please adhere to all federal, state, and local laws regarding safety.

11.2 Safety in mounting the DVC units

Mounting

the DVC units on mobile applications have their own safety guidelines. Care must be taken to locate

a safe place on the machine free from excessive heat, and moving parts that may sever the controller’s wiring

harness or physically harm the controllers. Please adhere to all federal, state, and local laws regarding safety.

11.3 Safety in programming the controllers

Safety to person

nel and machinery must be observed when programming moveable functions. Test program

changes to minimize safety hazards. If possible don’t test a machine at full function, only test program

modification area in a controlled environment. Make sure to let other personnel in the area know that a change

is being tested and possible negative outcomes. Please adhere to all federal, state, and local laws regarding

safety.

1 2 ... 140 141 142 143 144 145 146 147 148 149 150 ... 169 170

Žádné komentáře

High-country-tek DVC80 Uživatelský manuál Strana 145