High-country-tek MVP-SVR Series Uživatelský manuál Strana 5

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 13
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 4
021-MVP-SVR Rev A MVP-SVR User Manual 5
Copyright © High Country Tek, Inc. 2013
MVP-SVR Power Saver Valve Controller
MVP-SVR Controller
The MVP-SVR controller drives proportional solenoid valves with high starting current then reduces it to a lower
operating level. Operating power is reduced thereby saving energy, reducing heat and extending coil life.
Once configured, the settings are permanently stored in the controller memory.
MVP-SVR Features
Easily configured using HCT Graphical User Interface (GUI) or HCT Hand Held Interface (HHI)
LED indication of power, output current and fault status
Permanently sealed, standard DIN 43650 Form A connector body with pre-wired 18AWG PVC cable
Single coil applications
Adjustable output with short circuit protection
Start current and hold current are independently adjustable
Adjustable start time
Operating Specifications
Supply Voltage
9 to 28VDC
Supply Current
Valve current + 20mA (Quiescent Max)
Output Current
-12A: 1.2A MAX
-25A: 2.5A MAX
Coil Resistance
2 MIN.
Operating Temperature Range
-20º to 70º C (operating); -40º to 85º C (storage)
Enclosure
Glass filled Nylon
Dimensions
Inch: 2.4 L x 1.2 W x 0.75 H; Mm: 60 L x 30 W x 19 H
Zobrazit stránku 4
1 2 3 4 5 6 7 8 9 10 11 12 13

Komentáře k této Příručce

Žádné komentáře