High-country-tek epc, Electronic Pump Controller - A Multi-Function Uživatelský manuál stáhnout pdf (Strana 27)

023-00354-Rev1.6 evc/epc User Manual 27

evc/epc Controller

With SAE J1939 Interface

SAE J1939

Set Point A or B % and Set Point RPM

 A SAE J1939 message can set the demand for coil A and B.

Measured RPM

The evc/epc controller can accept an SAE J1939 message containing the measured engine RPM on PGN: 0xF004

(61444) Source Address (SA): 0x00.

Timeout

 The box is red when the SAE J1939 message has timed out indicating a bus, connection or data error.

 Outputs for coil A and B will ramp to the default settings according to the “Command & Error” page.

 If “Recover from loss of signal" is “ON”, the outputs will resume normal operation when a valid SAE J1939

message is received. The box becomes green.

MAC ID  Displays and allows changing the MAC ID. It is the network address for this specific evc/epc.

Report Analog Values  ON

force to change the settings.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 44 45

Žádné komentáře

High-country-tek epc, Electronic Pump Controller - A Multi-Function Uživatelský manuál Strana 27